GD350-19 Series VFD for Crane
AC 380V (-15%)–440V (+10%) 1.5–500kW
AC 520V (-15%)–690V (+10%) 22–630kW
Description
1. Great torque at low frequency: 0Hz/200% (of rated torque) in feedback vector control (FVC) mode; 0.5Hz/150% (of rated torque) in space voltage vector control mode
2. Excellent load adaptability: With optimized control algorithms for crane applications, the output torque can be adaptive according to the load condition so as to help achieve excellent comfortability regardless of with load or without load.
3. Tower crane slewing without vortex: Helps to implement vortex removal control, with the support for quick stop in reverse braking, quick FWD/REV switchover, and low-speed jogging positioning.
4. Conical rotor motor control: Helps adjust the magnetic flux according to the characteristics of conical rotor motor to realize fast brake release and closing control, simplify the commissioning steps, and ensure equipment safety.
5. Special-purpose braking logic: Integrates with torque verification to achieve safe run without slip after torque establishment; supports starting direction selection and brake selection in FWD/REV switchover to meet various starting requirements flexibly.
6. Travel limit protection: Includes Up/Down position limit and Up/Down DEC position limit to restrict the crane to run within the specified range. In addition to ensuring safety, this function can also optimize the stop method to improve device efficiency.
7. Anti-sway protection: Uses the sensorless anti-sway control algorithm to implement anti-sway control for various cranes. It is easy to commission and flexibly adaptive.
8. Loose rope protection: Avoids high-speed lifting, speed-boost malfunction, and safety accidents in loose rope state.
9. Smooth lifting: Restricts the high speed at the moment of steel rope straightening in high-speed lifting mode to reduce the impact caused by the sudden load to the crane at the lifting start.
10. Zero servo: Locks the motor at zero speed. That is, the motor can remain locked at zero speed even with external force applied in FWD/REV direction. Even if the brake fails, it can also drive the motor to suspend with full load or lower the load at low speed to ensure the safety of use.
11. Light load speed boost: Supports the constant power and stepped speed limit modes. It can match the optimum running speed according to the actual load to reduce the crane running period and improve efficiency.
12. Anti-snag protection: Indicates that the VFD outputs reserve torque so that the motor can stop at the fastest speed. This can effectively prevent the spreader from punching the top or snagging to ensure the safety.
13. STO/SIL2: Cuts off torque output when the motor stops to avoid exceptional startup, which makes the running more reliable and safe. In addition, the VFD can monitor system status only if it is powered on; and it can quickly recover.
14. Measuring load heights: Integrates with the rolling diameter calculation function to output the hook height information and instruct the crane driver to reduce the speed. This prevents the hook to collide with the drum.
15. Master/slave control: Supports power balance and speed synchronization between the master and slave. In power balance mode, it can ensure balanced motor output to meet the rigid connection requirements for multiple motors to drive the same load. In speed synchronization mode, it can ensure that the lifting mechanism synchronization, to ensure safety. In addition, it supports a master and multiple slaves to achieve flexible master/slave switchover.
16. Application macros special for cranes: Enable you to set parameters easily. Additionally, application macros can be user defined. For details about application macro parameters, see the operation manual.
17. Switchover between three motors: Achieves application macro switchover simultaneously. Therefore, you do not need to set certain function parameters after the switchover. Furthermore, application macro switchover can be implemented even in master/slave mode switchover.
18. Positioning stop: Supports positioning stop control for the trolley, long travel, and lifting mechanisms in closed-loop mode. This achieves more accurate equipment operating with higher efficiency.
19. Open/closed loop switchover through one key: Implements the quick switchover from closed-loop control to open-loop control when the encoder is faulty. In addition, the application macro is switched accordingly. This ensures the normal running. (There is no switchover response in running state.)
20. Multiple operating modes: Include operating lever, graded operating lever, electric potentiometer, communication, remote control, graded remote control and other speed giving methods to meet the application requirements of various cranes.
21. Extensive add-ons: Up to three expansion cards (IO card, communication card, and PG card) supported to meet different solution applications (two expansion cards are supported for 5.5kW and lower models).
